Payment & Shipping Terms:
|Box Base:||Polycarbonate||Box Cover:||Polycarbonate|
|Operation:||Lid 90degree Box Standing||Cable Grommet:||EPDM|
|Lock:||Screw Driving Lock||Capacity:||20Pair Plug In Modules|
20Pair Outdoor Waterproof Subscriber Terminal Box ( STB ) 90degree Standing Lid With Earthing
1. Outdoor DP Box Plastic for STB Modules 10pairs
2. Material:PC,with steel rails.
3. Cable grommets for wire entry and exit is for waterproof.
4. For plug in module (subscribe connector unit )unprotection and protection over voltage and over currence.
5. With screw lock and easy input of the subsciber cables
6. Application:Ourdoor waterproof
7.The module offers connection point between an exchange-side cable pair and a distribution pair
The distribution Point (DP) is designed for installation at distribution points in local networks to connect the customer’s telephones/CPEs.The distribution Point box are suitable for mounting on poles as well as for wall installation.It is environmentally protected for all outdoor applications.
Our product had successfully tested via Pressure test,terminal shock test,drop test,bump test,vibration test,salt fog test,corrosion test,splash proff test,Life test,durability test,thermal cycle test and heat age test. And successfully offered to big telecom companies over the world.
The subscriber connector unit consists of a rectangular box base with a cover and a connection module secured to the base.The top and base are hinged together, and the top is easily removable to facilitate working in cramped conditions.The cable grommets for wire entry and exit may be adjusted to conductor size and are also removable.A metal screw is provided for grounding purposes.
Application for replacing Tyco VX-SB subscribe connector unit terminal blocks,Connecting 1 pair module without protection,module with surge protection (gas-discharge instrument with surge protection to 230V) and module with overvoltage and overcurrent (overvoltage to 230V, and by two resistors PTC, which protect from the overcurrent).
5Pair STB modules as one unit STUB module block,the module can be with protection over-voltage or with protection over voltage and over current .
By the bottom of the box, there will enter the Multipair cable. The income thereof shall be protected to seal the set against the entry of water or moisture from the outside. The STUB block box also possess a mechanical retention that avoid spreading efforts will see subject the cable towards the inside of the box. These conditions shall not be affected by subjecting the cable to movements that normally can be exposed the whole during their use or installation.
Interior layout allows the comfortable handling of connections inside the box, facilitating their connection. For this purpose a enough distance between the side wall and the last row of modules. It will also facilitate the connection of Earth and the pair pilot conductor, which will have enough space.
The modules will be configured in groups (5pairs as one group) to form a block, which can be removed from the base of the box in case your replacement if necessary. Locking will take place by means of screws whose position will be based on a standardized template. The screws should be fixed using inserts in the base.
Used in interconnection point between secondary cable and service wire to subscribe houses.For mounting to walls,wood,metal or concrete poled
Outdoor waterproof Distribution Box :The type of STB module is required as your application.
|YH-3010-1||1pair DP box for STB module (EMPTY) 95*45*50mm|
|YH-3010-1G||1pair DP box with STB module(YH-5027) 95*45*50mm|
|YH-3010-1R||1pair DP box with STB module(YH-5028) 95*45*50mm|
|YH-3010-1O||1pair DP box with STB module(YH-5029) 95*45*50mm|
|YH-3010-2||2pair DP box for STB module (EMPTY) 145*95*75mm|
|YH-3011||10pair DP box for STB module (EMPTY) 195*195*85mm|
|YH-3012||20pair DP box for STB module (EMPTY) 350*190*95mm|
|YH-3031||10pair DP box for STB module (EMPTY)|
|YH-3032||20pair DP box for STB module (EMPTY)|
Contact Person: Miss. Xiang