Payment & Shipping Terms:
|Name:||C Type Clamp||Material:||Steel With Zinc Plating|
|Edge:||Free Of Sharp||Weight:||85g|
|Protection:||Good Resistance To Corrosion||Use:||Can Be Used With YH-1049|
Fiber Optic Hanging Hardware C type Draw Hook FTTH Fiber Optic Accessories
1. The body is made of steel with zinc plating.
2. for managing the fiber optic cables
3. Effective and time saving for cabling.
4. Good reisistance to Corrosion
4. ISO 9001:2008 Certified
The C type Hanging Hooks is made of steel with Zinc Plating,with good resistance to corrosion.To satisfied with the out plant working environment,keep the dropwire/fiber cable and other cables firmly without loose.
The stainless steel is less readily sensitized with respect to inter-granular corrosion especially during fabrication.The process of coating is carried out after the clamp has been formed into shape and with the holes already punched or sheared-off so that the edges are also coated.The coating is adherent so that it will not be removed by any reasonable process of handling or installation.The finished product is free from sharp edges, uncoated areas, blisters, dross inclusions and other type of projections that would interfere with its intended use.
The FTTH Installation Accessories Set concludes:junction box,fiber wall socket(also named Single family unit rosette,SFU rosette),draw hooks,cable clamp,cable wall bushings,cable glands,cable clips,tail duct,cable wiring duct,nail clip.Aluminium anchor clamp for drop cable,plastic anchor clamp for Figure-8 cable/steel anchor clamp for ADSS cable,dead end clamp,wedge anchoring clamp,Suspension clamp,down lead clamp,drop cable clamp,bracket,hooks,stainless steel band are also available to suit different installation needs .FTTH anchoring device enables both the single or double anchoring of fibre cable. The model comes in versions: the YH-7593 is suitable for round Ø2 - 6mm cable whereas the YH-1074 FTTH fits flat cable,YH-1070 YH-1049 fits the 1pair-2pair drop wire.
Cable bushings were originally designed for indoor use on sheet rock.Cable bushings are plastic grommets inserted into a wall to provide a clean appearance for coax cable,fiber optic cable and all cable entry. Cable bushings are a low cost and fast alternative to installing traditional wall plates.They protect the cable from sharp edges when in applications. We offer different shape and size cable wall bushings,wall tubes,fiber inside corner,fiber outside corner,flat elbow,raceway duct fitting,raceway molding,bend radius,tail duct,cable clamp,wiring duct.All used for fiber optic cabling and other wire cabling projects.
Fiber Optic Exterior Slack Storage W/O Holes hidden and organized.Slack storage box is used for exterior slack storage applications using single fiber cable. There are two stackable storage spools that allow storage of multiple single fiber cable drops. Both of these spools are removable. In an instance where only one spool is sufficient, the spool can either be secured at a lower level or can be mounted at an elevation onto the risers off the back of the inside of the box as a spool on the upper level. This allows additional storage under the spool.
Fiber Inside Corner, Inside corner for the self adhesive single fiber molding.
Fiber Flat Elbow, Flat elbow for the self adhesive single fiber molding.
Fiber Outside Corner,Outside corners for the self adhesive single fiber molding.
Self Adhesive Single Fiber Molding
Cable drawing hooks are made of metal,hanging hardware, hard material,with splint type and C type for option.The conduit box,pipe joint box single gang or double gang are made of PC material,fire restardant.
Span Clamp is attached to the messenger wire at mid span to hold the p-clamps with dropwires.Used together with S clamp,fish clamp,drop cable anchor clamp,FTTH Suspension Flat Cable Clamps.
Telecommunications subscriber loop
Fiber to the home (FTTH)
Contact Person: Miss. Xiang