ADSS OPGW Type Down Lead Clamp On Pole Tower 9-20mm Size 1.2M Length

ADSS OPGW Type Cable Down-Lead Clamp On Pole Tower

The lead-down clamp is used to lead down the optical cable and be fixed the optical cable when it is jumpered, which improves the mechanical performance of the clamp. It is mainly used for the communication line of the newly built overhead high-voltage power transmission system of 35kv and above. The stainless steel tube and cable core stranding design is reasonable, and the optical fiber is redundant. The length is accurate; the all-dielectric self-supporting optical cable (ADSS) is suspended on the pole tower with the line turning angle less than 25°. Down-lead clamps for rubber towers are used to fix the up and down or up of the optical cable on the tower so that it will not shake and avoid the optical cable from wearing.

Material	Stainless Steel +Aluminum+ plastic
Cable Size	9~20mm
weight	0.7KG

Application:

1. For fiber optic cable connecting tower, tower cable lead terminal and the middle under the arche part of the tension cable tower fixed, each 1.5 meters with a set of general, other needs can also use a fixed place.

2. The down lead clamp is used in the immobility of OPGW/ADSS on pole/tower. It is suitable for the riveting of fiber when jumping or down lead. And it was commonly installed every 1.5 to 2 meter each set. This clamp bears the excellence of easy installation, adjustable range be suitable for different Dia.