Payment & Shipping Terms:
|Box Base:||Polycarbonate||Box Cover:||Polycarbonate|
|Dropwire Grommet:||Thermoplastic Rubber||Cable Grommet:||EPDM|
|Lock:||Screw Driving Lock||Capacity:||10Pair STB Modules|
Polycarbonate Network Distribution Box,
STB Modules Network Distribution Box
10Pair Wall Distribution Subscriber Terminal Box Polycarbonate
1. Outdoor DP Box Plastic for STB Modules 10pairs
2. Material:PC,with steel rails.
3. Cable grommets for wire entry and exit is for waterproof.
4. For plug in module (subscribe connector unit )unprotection and protection over voltage and over currence.
5. With screw lock
6. Application:Ourdoor or indoor
7. The module offers connection point between an exchange-side cable pair and a distribution pair
This is used in terminating cables of secondary telephone networks to the cable pairs of subscriber lines. It consists of a body and cover which house a stubbed block.
The box is designed for wall mounting. The lid has opening positions 90degree,135degree ect., which can be selected according to the amount of working space available, and is also fitted with a seal to limit water entry.Grommets are provided for dropwire access.The box locking mechanism is mounted through the cable stub and is effective on closing the box; to open the box again a special key or a screwdriver is required depending upon the lock type.The ground terminals of each pair are electrically connected to the cable shielding and to an external ground terminal. The unit is sealed with resin and the cable-block connection is sealed with heat-shrinkable tubing.
The subscriber terminal box consists of a rectangular box base with a cover and a connection module secured to the base.The top and base are hinged together, and the top is easily removable to facilitate working in cramped conditions.The cable grommets for wire entry and exit may be adjusted to conductor size and are also removable.A metal screw is provided for grounding purposes.
Application for replacing Tyco VX-SB subscribe connector unit terminal blocks,Connecting 1 pair module without protection,module with surge protection (gas-discharge instrument with surge protection to 230V) and module with overvoltage and overcurrent (overvoltage to 230V, and by two resistors PTC, which protect from the overcurrent).
4. Arial DP is equipped with pole mounting accessories as required.
Used in interconnection point between secondary cable and service wire to subscribe houses.For mounting to walls,wood,metal or concrete poled
Outdoor waterproof Distribution Box :The type of STB module is required as your application.
-G is for YH-5027 unprotected,
-R is for YH-5028 with GDT protection,
-O is for YH-5029 with GDT and PTC protection.
standard with expansion bolt for wall mounted.The accessories for pole mounted is on requirement.
|YH-3010-1||1pair DP box for STB module (EMPTY) 95*45*50mm|
|YH-3010-1G||1pair DP box with STB module(YH-5027) 95*45*50mm|
|YH-3010-1R||1pair DP box with STB module(YH-5028) 95*45*50mm|
|YH-3010-1O||1pair DP box with STB module(YH-5029) 95*45*50mm|
|YH-3010-2||2pair DP box for STB module (EMPTY) 145*95*75mm|
|YH-3011||10pair DP box for STB module (EMPTY) 195*195*85mm|
|YH-3012||20pair DP box for STB module (EMPTY) 350*190*95mm|
|YH-3031||10pair DP box for STB module (EMPTY)|
|YH-3032||20pair DP box for STB module (EMPTY)|
Contact Person: Miss. Xiang