Payment & Shipping Terms:
|Product Name:||12Cores ODF Fiber Optic Distribution Termination Box||Material:||PC+ABS,PC ABS|
|Application:||FTTH FTTB FTTX Network||Color:||Gray|
|Installtaion:||Wall And Pole Mountable||Operating Temperature:||-5~+40℃|
optical termination box,
fiber optic junction box
12 Core Outdoor Fiber Optic Terminal box with lock IP65 Waterproof UV Protection
1. ABS material used ensures the body strong and light.
2. Protection Level: IP55.
3. Water-proof design for outdoor uses, lock provided for extra security.resistance and dustproof,flame-retardant.
4. Space saving! Double-layer design for easier installation and maintenances
5. Dimensions: 210mm x 250mm x 60mm (W x H x D)
6. Adapter Capacity: 12SC/FC simplex adapters or LC duplex adapters
ABS material used ensures the body strong and light.
Protection Level: IP55.
Water-proof design for outdoor uses, lock provided for extra security.
Easy installations: Ready for wall mount – installation kit provided.
Adjustable adapter slotused – to suit different size pigtails.
Space saving! Double-layer design for easier installation and maintenances:
Lower layer for splicing, also suitable for mini splitters.
Upper layer foradapters, connectors and fiber distribution.
Cable fixing units provided for fixing the outdoor optical cable.
Both cable glands and tie-wrapsaccessible.
Pre-connectorized cables supported (pre-connected with fast-connectors).
Bend radius protected and cable routing paths provided.
Dimensions and Capability:
Dimensions: 210mm x 250mm x 60mm (W x H x D)
Adapter Capacity: 12SC/FC simplex adapters or LC duplex adapters.
Cable Entrance: 2
Cable Exit: 12 simplex drop cables (Pre-connectorized cables supported)
The FTTH Installation Accessories Set concludes:junction box,fiber wall socket(also named Single family unit rosette,SFU rosette),draw hooks,cable clamp,cable wall bushings,cable glands,cable clips,tail duct,cable wiring duct,nail clip.
Cable bushings were originally designed for indoor use on sheet rock.Cable bushings are plastic grommets inserted into a wall to provide a clean appearance for coax cable,fiber optic cable and all cable entry. Cable bushings are a low cost and fast alternative to installing traditional wall plates.They protect the cable from sharp edges when in applications. We offer different shape and size cable wall bushings,wall tubes,fiber inside corner,fiber outside corner,flat elbow,raceway duct fitting,raceway molding,bend radius,tail duct,cable clamp,wiring duct.All used for fiber optic cabling and other wire cabling projects.
Fiber Optic Exterior Slack Storage W/O Holes hidden and organized.Slack storage box is used for exterior slack storage applications using single fiber cable. There are two stackable storage spools that allow storage of multiple single fiber cable drops. Both of these spools are removable. In an instance where only one spool is sufficient, the spool can either be secured at a lower level or can be mounted at an elevation onto the risers off the back of the inside of the box as a spool on the upper level. This allows additional storage under the spool.
Fiber Inside Corner, Inside corner for the self adhesive single fiber molding.
Fiber Flat Elbow, Flat elbow for the self adhesive single fiber molding.
Fiber Outside Corner,Outside corners for the self adhesive single fiber molding.
|Material||Cold rolled steel for the box, ABS for the tray|
|Capacity||12core (12core,24core,48core,72core,96core,144core is available)|
|Installation Method (in overstriking )||Floor Standing / wall mounted / pole mounted / rack mounted / corridor mounted / mounted in cabinet|
1. 110 punch down tool
2. Quante 3 in 1 tool
3. Quante ID 85 tool (A)
4. Quante Pouyet STG Tool
5. MDF termination tool
6. Northern telecom type punch down tool
7. Quante ID 3000 tool
8. Krone insertion tool
9. HUAWEI DXD tools
10. Quante SID tool
11. ZTE FA6-09A1 FA6-09A2 FA6-09B1 FA6-09B2 insertion tool
12. MDF 7100 block insertion tools
13.Sunsea punch down tool
14 .Bix type insertion tool,Inserter wire 9A
15. Porta insertion tool Inserter wire 8A,used on jack tests.
1. Coaxial cable compression crimping tools For F connector/BNC connector/RCA connector
2. Coaxial cable stripper
3. Cable cutter for RG58/RG59/RG6
4. Pin extrator (3 in 1 tool,One end to enlarge space between shield and insulation for RG59,another end for RG6,the third end for locking F connector into tool socket and twist into onto a stripped cable end)
5. BNC connector removal tool for 6" 8" 12" and 16"
6. F connector removal tool for 6" 8" 12" and 16"
For more information, please check out to contact firstname.lastname@example.org .
Contact Person: Miss. Xiang