Payment & Shipping Terms:
|Material:||PBT Or ABS(UL94V-0)||Gel:||Sillicon Gel Filled|
|Connection:||5 Pole Connection||Application:||Customer Wire (CW) And Drop Wire(DW) Connection|
Silicon GEL STB Module Unprotected Subscriber Drop Wire Connector
1, Material: PBT or ABS(UL94V-0),Contact: Phosphor Bronze
2, With 5 pole connection
3, The plug can be with 3point protector(color red with arrester for over-voltage protection) and 5point protect (color orange with arrester and PCT for both over-voltage protection and over-current protection), if without protection the color is grey.
4, For Customer Wire (CW) and Drop Wire(DW) Connection
5, Available to install this drop wire module into 1pair distribution box,2pair distribution box,10pair distribution box ect.,waterproof,IP54.
6. 100% test passed,arrester voltage usually for 230V,it can be on your requirement.
1pair STB Module Silicon Gel Filled Without Protection Subscriber Connector Unit VX-SB
The gel for the plug can be silicon or silicon gel,mainly for protection and waterproof.
The subscriber drop wire connector STB module is especially recommended for Country Telecom company ,operators in Asia countries,South American countries,Russia and so on:
1. Outdoor connections where the environment conditions are extremely atrocious to protect telecommuniactin equipment and circuitry line.
2. Terminations where user development characteristics require future flexibility in terms of the type of protection or filtering capabilities. There are different capacity distribution box for different requirement of the user.Normally offering box with capacity from 1pair to 20pair for application.
The STB module (1 pair drop wire connection module with protection ) provide a connection point between an exchange-side cable pair and a distribution pair for telecommunication equipment. It incorporates a 5-point plug in module to provide continuity and a range of other options.
Removal of the plug-in module does not disturb wire connections but makes contacts to them available for testing of both sides of the telecommunication network.
The connection cables connection is carried out by displacement of isolate using a screwdriver with a width of 5-7 mm flat Screw on which it acts should be missed and will have a top clear of press to warn the operator that has made the connection.The connection on the network side will also be displacement of insulation without requiring the use of any special tools.The ducts where contacts are housed will be filled with a composite insulator which prevents the degradation of connection produced by the entry of dust and moisture. To make the connection just enter drivers in the accommodation which the connector has to do so and act on a screw that produces the inclusion in contacts without having to perform other concurrent operations.Housing utility cables possess a CAP to facilitate correct positioning of the same in order to facilitate the connection.The Multipair cable must supply connected. This connection will be protected by a protective insulating compound.The allowable diameter shall be:Network side: 0.4 to 0.8 mm, with a diameter of 1,5 mm. maximum insulation ;Client-side: 0.5-0.8 mm, with a maximum insulation diameter of 3.2 mm.
Item no. Description
YH-5027 Drop wire(STB) module without protection,Grey Plug
YH-5028 Drop wire(STB) module with GDT protection,Red Plug
YH-5029 Drop wire(STB) module with GDT and PTC protection,Orange Plug
STB distribution box offers 1pair subscribe terminal box,2pair wire connection box,4pair STB box,10pair drop wire module box,20pair dropwire module box.
The subscriber connector unit is used for the connection of an outdoor to an indoor drop wire. It allows for circuit testing in both network directions.The box provides environmental protection. The product is specially recommended for aggressive environmental conditions,terminations where future requirements
may include different types of protection.
|Mechanical Performance||Plastic material: ABS&PBT(UL94V-0)|
|Contact material: Phosphor Bronze.|
|Surface Plating Silver(0.5um-5um)|
|Earth bar: Phosphor Bronze.Surface Plating nickel|
|Environment Characteristic||Storage Tempreture: 40 to 70°C|
|Operating Temperature : 10 to 60°C|
|Relative Humidity: 95%, noncondition|
|Electrical Performance||Insulation resistance: 1000 Mohms minimum|
|Contact resistance :5 mohms maximum|
|Dielectric intensity: 1200V DC 60s can't spark over and haven't fly arc|
We make sure that every product is 100% tested in the factory before packing.
Our products are popular with world's Telecom operator and users.Clients from America, South America, Europe,Asia and Africa and happy with our quality.We can offer OEM and ODM service according to customer's requirement as well. Better quality leads to more success ! One hundred successful orders lost in a complaint !
Order to be delivered goods within 7-10 days after we received your payment usually.For exact date,please check with our sales. Meanwhile,we could provide competitive shipping service for you, by sea, by air or by express. Appointed forwarder is also available as you prefer.
Contact US !
Contact Person: Miss. Xiang