Payment & Shipping Terms:
|Material:||All Plastic||Water Proof:||Water-tight|
|Corrosion:||Corrosion Proof||Application:||Blank Duct Plugs Sealing Devices For Ducted Cable Network|
|Size:||Φ32/ 26mm, Φ40/ 33mm, Φ50/ 42mm||Usage:||Removable And Reusable|
Fiber Optic Simplex Duct Plugs Sealing Devices for Ducted Cable Network Watertight and Gastight
1. All plastic construction.
2. Corrosion proof
4. Easy installation and removal
5. Removable and Reusable
6. Blank Duct Plugs Sealing Devices for Ducted Cable Network.Economic,safety and convenient.
7.Available for Duct: Φ32/ 26mm, Φ34/ 28mm, Φ40/ 33mm, Φ50/ 42mm, Φ60/ 50mm
Watertight and gastight
Seal all types of inner ducts
Very simple installation around existing cables
Wide cable sealing range
Install and remove by hand
Removable and Reusable
Economic,safety and convenient.
Simplex entry seals effectively seal around and support conduits and cables in throughpenetration openings or core drilled penetrations,
such as building entrances or conduit openings.Simplex entry seals prevent leakage around conduits and cables entering structures of all
kinds. Because of their split design, these plugs are retrofitable, removable, and reusable.Simplex plugs feature standard sized fasteners
made of stainless steel, easily installed with widely available tools, and are sized to fit the most commonly used core-drill bits, conduits,
and conduit termination fittings.(Refer to JM-SIM)
When selecting a Simplex Plug:
1. Determine the inside diameter of the duct and the outside diameter of the cable or inner duct and select the range of plugs.
2. If the diameter of the cable or inner duct is smaller than the specified range, use a Bushing Sleeve to build up the cable or inner duct diameter. Select a plug with a Bushing Sleeve series number and refer to the Bushing Sleeve data sheet for a chart that provides information required to select the correct Bushing Sleeve.
For different application of fiber cable and duct sealing devices,there is expanding duct plug,blank duct plug,simplex duct plug,straight microsuct connector,reducer microduct connector,end cap microduct connector,we must be well know with the fiber cable diameter and duct inner diameter and out diameter to choose the correct and best protection duct plugs.
Blank duct plugs effectively seal conduits to reduce the cost of cable placement and maintenance in new underground construction projects and routine work. These plugs are economical because they are removable and reusable.A plug has a dummy rod so it can also be used to close a duct without a cable inside.The plug is divisible so it can be installed after blowing a cable in the duct.
Manufactured from high-impact plastic components, combined with durable elastic gaskets, Blank plugs are corrosion proof and effective as long-term or temporary seals.
Economic and Safety
Both water-tight and gas-tight, Blank duct plugs prevent the flow of water and the costly sedimentation of duct banks and conduit systems while confining problems of dangerous vapors to their source.
Each Blank plug is equipped with a rope tie device to allow the securing of pull rope to the plug’s back compression plate. Installers can attach the rope to the back compression plate of the plug and store excess slack rope behind the plug within the conduit system for future use.
The FTTH Installation Accessories Set concludes:junction box,fiber wall socket(also named Single family unit rosette,SFU rosette),draw hooks,cable clamp,cable wall bushings,cable glands,cable clips,tail duct,cable wiring duct,nail clip.
Cable bushings were originally designed for indoor use on sheet rock.Cable bushings are plastic grommets inserted into a wall to provide a clean appearance for coax cable,fiber optic cable and all cable entry. Cable bushings are a low cost and fast alternative to installing traditional wall plates.They protect the cable from sharp edges when in applications. We offer different shape and size cable wall bushings,wall tubes,fiber inside corner,fiber outside corner,flat elbow,raceway duct fitting,raceway molding,bend radius,tail duct,cable clamp,wiring duct.All used for fiber optic cabling and other wire cabling projects.
Fiber Optic Exterior Slack Storage W/O Holes hidden and organized.Slack storage box is used for exterior slack storage applications using single fiber cable. There are two stackable storage spools that allow storage of multiple single fiber cable drops. Both of these spools are removable. In an instance where only one spool is sufficient, the spool can either be secured at a lower level or can be mounted at an elevation onto the risers off the back of the inside of the box as a spool on the upper level. This allows additional storage under the spool.
Fiber Outside Corner,Outside corners for the self adhesive single fiber molding.
Fiber Inside Corner, Inside corner for the self adhesive single fiber molding.
Fiber Flat Elbow, Flat elbow for the self adhesive single fiber molding.
Self Adhesive Single Fiber Molding
Cable drawing hooks are made of metal,hanging hardware, hard material,with splint type and C type for option.The conduit box,pipe joint box single gang or double gang are made of PC material,fire restardant.
Blank Duct Plugs Sealing Devices for Ducted Cable Network
Telecommunications subscriber loop
Fiber to the home (FTTH)
Contact Person: Miss. Xiang