Payment & Shipping Terms:
High Density Single-port splitter and bridging module for BRCP-SP Integrated Splitter Block 242840CF
1, Material: PBT or ABS(UL94V-0)
2, Contact: Phosphor Bronze
3, Silver Plating: 0.5 um1.25 um5 um
4, Can be installed on krone type terminal block
5, With 2pole arrester or 3 pole arrester,can be with duct cover.
6. 8Pair protection magazine,10Pair protection magazine,krone single pair protector,5pin lightning protector,single line protectors, the BRCP-SP splitter block ,various type on option.
7, 100% test passed,arrester voltage usually for 230V,it can be on your requirement.
Single Line Splitter and Bridging Module
Using field-manageable single line splitter modules, the splitter block provides individual customer-centric service line management at the central office MDF or the remote cross-connect field, supporting multiple services (POTS, ADSL, ADSL2+, VDSL, naked DSL, g.SHDSL, VoIP, CLEC transmission, etc.)
Single-port splitters allow for individual splitter replacement, in the case of a splitter fault, without disrupting POTS service and without removing multiple splitters, as in the case of a DSLAM full splitter board replacement. Bridging modules support all applications that do not require a POTS input, such as naked DSL, full unbundling, g.SHDSL or VoIP.
A.Modules are located at the rear of the block
C.Splitter and bridging modules are keyed
Integrated Splitter Block Mechnical specifications:
48-port splitter block- Hight:135mm
width: 133mm Depth: 143mm
Wire range IDC contacts- 0.4mm-0.8mm (26AWG to 20AWG)
Contacts: Bronze, tin (Sn) plating
Insulation resistance: > 1000M Om
Contact resistance: < 10mOm
Dielectric strength: 3000V rms, 60Hz AC
High voltage surge: 3000V DC surge
Insertion loss: <0.01dB to 2.2MHz <0.02dB to 12MHz <0.04dB to 30MHz
Return loss: >57dB to 2.2MHz >52dB to 12MHz >43dB to 30MHz
Crosstalk: >66dB to 2.2MHz >51dB to 12MHz >44dB to 30MHz
Operating temperature: -10°C to 60°C
Storage temperature: -40°C to 90°C
Flammability rating: UL94 V-0 material used
High speed LAN and WAN systems,used to protect the telecom equipment from damage of lightning,over voltage and over currence.
|Mechanical Performance||Plastic material: Thermoplastic|
|Contact material: Bronze, tin (Sn) plating|
|Surface Plating Silver(0.5um-5um)|
|Earth bar: Phosphor Bronze.Surface Plating nickel|
|Environment Characteristic||Storage Tempreture: 40 to 70°C|
|Operating Temperature : 10 to 60°C|
|Relative Humidity: 95%, noncondition|
|Electrical Performance||Insulation resistance: 1000 Mohms minimum|
|Contact resistance :10 mohms maximum|
|Dielectric intensity: 3000V rms, 60Hz AC|
Contact Person: Miss. Xiang