These anchoring clamps are made of an opened conical body, a pair of plastic wedges and a flexible bail equipped with an insulating thimble. The bail can be locked onto the clamp body once passed through the pole bracket and re-opened by hand at any time when the clamp is not under full load. All parts are secured together to prevent any loss during installation.
● Dead-ending of 6 to 20 mm ADSS cables
● Minimum breaking load of 500/600 daN
● Installation on any pole hardware fi tting: brackets, cross-arms or eye bolt with a min eye Ø of 15 mm
● 4kV thimble as standard. 11 kV thimble available
● All plastic parts are UV resistant and tested in conditions equivalent to min 25 years of service in tropical environmen
Compact Series
Standard Series
These clamps are used as cable dead-end at end poles for terminating the cable route (using one clamp).
Single dead-end using (1) ACADSS clamp, (2) Bracket
● At jointing poles
● At intermediate angle poles when the cable route deviates by more than 20°
● At intermediate poles when the two spans are different in length
● At intermediate poles on hilly landscapes
Place the clamp body over the cable with the wedges in their back position.
LEAVE A MESSAGE
The first thing we do is meeting with our clients and talk through their goals on a future project. During this meeting, feel free to communicate your ideas and ask lots of questions.