The ACADSS clamps are designed for dead-ending aerial ADSS cables on access networks where spans do not exceed 90 m. All parts are secured together to prevent any loss during installation. Different capacities are available to adapt to the cable diameter.
They consist of a conical body and wedges which hold the cables under tension while preserving the fibre properties.
Two models are available depending on the cable structure:
1- Compact series with 165 mm wedges for light ADSS cables up to 14 mm dia.
2- Standard series with 230 mm wedges for high fibre count ADSS cables up to 19 mm dia.
● Dead-ending of 6 to 19 mm ADSS cables
● Minimum breaking load of 500/600 daN
● Installation on any brackets, cross-arms or eye bolts with a min eye Ø of 15 mm
● 4kV thimble as standard - 11 kV thimble available
● All plastic parts are UV resistant
● Light and compact products
● Easy, quick and safe dead-ending
● Installation takes seconds – no tools requested
● Flexible bail acts as a damper against galloping of cables in windy conditions
● 4 kV insulation provide
Compact Series
Standard Series
These clamps are used as cable dead-end at end poles for terminating the cable route (using one clamp).
Single dead-end using (1) ACADSS clamp, (2) Bracket
● At jointing poles
● At intermediate angle poles when the cable route deviates by more than 20°
● At intermediate poles when the two spans are different in length
● At intermediate poles on hilly landscapes
Place the clamp body over the cable with the wedges in their back position.
LEAVE A MESSAGE
The first thing we do is meeting with our clients and talk through their goals on a future project. During this meeting, feel free to communicate your ideas and ask lots of questions.