PRODUCTS
VR
Outdoor Wire Anchor
Description

Micro Ducts of high density polyethylene with HDPE as the main raw material, are the composite pipe with inner wall made of silicon material lining made by the advanced plastic extrusion forming technology, the inner wall of this duct is a solid permanent lubrication layer, which has self-lubricity and effectively reduce the friction resistance between the cable and duct when the cable is repeatedly extracting in the duct.

 

● Optimizes system design and utilization

● Available in various sizes

● Single and multiple (bundled) configurations for specific project needs

● Permanently lubricated with our unique Perma-LubeTM process for longer micro fiber cable installations

● Variety of colors available for easy identification

● Sequential foot or meter markings

● Standard stock lengths for faster service

● Custom lengths are also available

Products Show


 
               
               
               
               
               
                 
HDPE Micro Duct


Item No.

Raw Materials

Physical and Mechanical Properties

Materials

Melt Flow Index

Density

Environmental Stress Crack
Resist (F50)

Outer Diameter

Wall Thickness

Inner Diameter Clearance

Ovality

Pressurization

Kink

Tensile Strength

Heat Reversion

Co-efficient of Friction

Color and Printing

Visual Appearance

Crush

Impact

Min. Bend Radius

DW-MD0535

100% virgin HDPE

≤ 0.40 g/10min

0.940~0.958 g/cm3

Min. 96h

5.0mm ± 0.1mm

0.75mm ± 0.10mm

A 3.0mm steel ball can be blown freely through the duct.

≤ 5%

No damage and leakage

≤ 50mm

≥ 185N

≤ 3%

≤ 0.1

As per customer specification

Ribbed inside & smooth outside surface, free from blisters, shrink hole, flaking, scratches & roughness.

No residual deformation > 15% of inner and outer diameter, shall pass inner diameter clearance test.

DW-MD0704

100% virgin HDPE

≤ 0.40 g/10min

0.940~0.958 g/cm3

Min. 96h

7.0mm ± 0.1mm

1.50mm ± 0.10mm

A 3.0mm steel ball can be blown freely through the duct.

≤ 5%

No damage and leakage

≤ 70mm

≥ 470N

≤ 3%

≤ 0.1

As per customer specification

DW-MD0735

100% virgin HDPE

≤ 0.40 g/10min

0.940~0.958 g/cm3

Min. 96h

7.0mm ± 0.1mm

1.75mm ± 0.10mm

A 3.0mm steel ball can be blown freely through the duct.

≤ 5%

No damage and leakage

≤ 70mm

≥520N

≤ 3%

≤ 0.1

As per customer specification

DW-MD0755

100% virgin HDPE

≤ 0.40 g/10min

0.940~0.958 g/cm3

Min. 96h

7.0mm ± 0.1mm

0.75mm ± 0.10mm

A 4.0mm steel ball can be blown freely through the duct.

≤ 5%

No damage and leakage

≤ 70mm

≥265N

≤ 3%

≤ 0.1

As per customer specification

DW-MD0805

100% virgin HDPE

≤ 0.40 g/10min

0.940~0.958 g/cm3

Min. 96h

8.0mm ± 0.1mm

1.50mm ± 0.10mm

A 3.5mm steel ball can be blown freely through the duct.

≤ 5%

No damage and leakage

≤ 80mm

≥550N

≤ 3%

≤ 0.1

As per customer specification

DW-MD0806

100% virgin HDPE

≤ 0.40 g/10min

0.940~0.958 g/cm3

Min. 96h

8.0mm ± 0.1mm

1.00mm ± 0.10mm

A 4.0mm steel ball can be blown freely through the duct.

≤ 5%

No damage and leakage

≤ 80mm

≥385N

≤ 3%

≤ 0.1

As per customer specification

DW-MD1006

100% virgin HDPE

≤ 0.40 g/10min

0.940~0.958 g/cm3

Min. 96h

10.0mm ± 0.1mm

2.00mm ± 0.10mm

A 4.0mm steel ball can be blown freely through the duct.

≤ 5%

No damage and leakage

≤100mm

≥910N

≤ 3%

≤ 0.1

As per customer specification

DW-MD1008

100% virgin HDPE

≤ 0.40 g/10min

0.940~0.958 g/cm3

Min. 96h

10.0mm ± 0.1mm

1.00mm ± 0.10mm

A 6.0mm steel ball can be blown freely through the duct.

≤ 5%

No damage and leakage

≤100mm

≥520N

≤ 3%

≤ 0.1

As per customer specification

DW-MD1208

100% virgin HDPE

≤ 0.40 g/10min

0.940~0.958 g/cm3

Min. 96h

12.0mm ± 0.1mm

2.00mm ± 0.10mm

A 6.0mm steel ball can be blown freely through the duct.

≤ 5%

No damage and leakage

≤120mm

≥1200N

≤ 3%

≤ 0.1

As per customer specification

DW-MD1210

100% virgin HDPE

≤ 0.40 g/10min

0.940~0.958 g/cm3

Min. 96h

12.0mm ± 0.1mm

1.00mm ± 0.10mm

A 8.5mm steel ball can be blown freely through the duct.

≤ 5%

No damage and leakage

≤120mm

≥620N

≤ 3%

≤ 0.1

As per customer specification

DW-MD1410

100% virgin HDPE

≤ 0.40 g/10min

0.940~0.958 g/cm3

Min. 96h

14.0mm ± 0.1mm

2.00mm ± 0.10mm

A 8.5mm steel ball can be blown freely through the duct.

≤ 5%

No damage and leakage

≤140mm

≥1350N

≤ 3%

≤ 0.1

As per customer specification

DW-MD1412

100% virgin HDPE

≤ 0.40 g/10min

0.940~0.958 g/cm3

Min. 96h

14.0mm ± 0.1mm

1.00mm ± 0.10mm

A 9.0mm steel ball can be blown freely through the duct.

≤ 5%

No damage and leakage

≤140mm

≥740N

≤ 3%

≤ 0.1

As per customer specification

DW-MD1612

100% virgin HDPE

≤ 0.40 g/10min

0.940~0.958 g/cm3

Min. 96h

16.0mm ± 0.15mm

2.00 ± 0.10mm

A 9.0mm steel ball can be blown freely through the duct.

≤ 5%

No damage and leakage

≤176mm

≥1600N

≤ 3%

≤ 0.1

As per customer specification

DW-MD2016

100% virgin HDPE

≤ 0.40 g/10min

0.940~0.958 g/cm3

Min. 96h

20.0mm ± 0.15mm

2.00 ± 0.10mm

A 10.0mm steel ball can be blown freely through the duct.

≤ 5%

No damage and leakage

≤220mm

≥2100N

≤ 3%

≤ 0.1

As per customer specification


Application


Micro Ducts are suitable for the installation of fiber units and/or micro cables containing between 1 and 288 fibers. Dependent on the individual micro duct diameter, tube bundles are available in several types such as DB (direct bury), DI (direct install) and making them ideal for diverse applications such as long-distance bone network, WAN, in-building, campus and FTTH. They can also be customized to meet other specific applications.


               
               
               
               
Basic Information
  • Year Established
    --
  • Business Type
    --
  • Country / Region
    --
  • Main Industry
    --
  • Main Products
    --
  • Enterprise Legal Person
    --
  • Total Employees
    --
  • Annual Output Value
    --
  • Export Market
    --
  • Cooperated Customers
    --
Contact Us
Take advantage of our unrivaled knowledge and experience, we offer you the best customization service.

LEAVE A MESSAGE

The first thing we do is meeting with our clients and talk through their goals on a future project. During this meeting, feel free to communicate your ideas and ask lots of questions.

Attachment:
    Chat with Us

    Send your inquiry

    Attachment:
      Choose a different language
      English
      فارسی
      Português
      Español
      Polski
      bahasa Indonesia
      Tiếng Việt
      ภาษาไทย
      italiano
      العربية
      русский
      français
      Deutsch
      Current language:English