Payment & Shipping Terms:
|Name:||Fiber Optic Cable Sheath Cutter||Type:||Over Sheath Fiber Cable|
|Material:||Carbon Steel And PVC||Weight:||185G|
network crimping tool,
network termination tool
Longitudinal Strip Cutting Knife KMS-K Climbing Tiger For Over sheath Fiber cable Drop Cable
The double-edged knives made of special metal materials are sharp and durable. The Yellow fixator is specially used for optical cable, and the gray fixer is suitable for cables less than 25mm. When the double-sided knives need to be replaced, use six angle adjusting knives.
The longitudinal strip cutting knife (known as the "climbing tiger") is an ideal tool for the longitudinal opening of the optical cable in the construction and maintenance of the optical cable. In the construction and maintenance of the optical cable, many construction workers are distressed to find a longitudinal cable knife with excellent performance, comfortable operation, time saving and labor saving. The KMS-K type longitudinal cable cutter is an excellent tool welcomed by American and European construction workers. It is an ideal tool for longitudinally peeling optical fiber cable in construction and maintenance of optical cable.
The four adjustable positions of the eccentric wheel, consisting of a handle, a gear clip, a double-sided knife and an eccentric wheel (adjustable four positions), can be adapted to the light (electric) cable that stripped the thickness of the different outer protective layers. A double-sided knife blade with a special, sharp and durable material
There are also special adapters for black and yellow (electric) cables, six inner screwdrivers, packing boxes and operating instructions. The Yellow adaptor is specially used for optical cable, while the black adaptor is suitable for cables less than 25mm. The six angle screwdriver is used for replacing double sided knives. When the actual longitudinal open cable operation, the Yellow adapter is set at the double-sided knife, and the cable eccentricity is adjusted correctly, the knife mouth is inserted into the cable, and the blade is parallel to the cable, and the handle can be repeatedly pressed.
When the eccentricity is adjusted correctly, the blade is inserted into the fiber cable, and the blade is parallel to the cable, the knife body is pressed with the thumb, the other hand turns the handle, and the cable is slowly cut along the cable, such as the thick outer skin of the optical cable, and the eccentricity can be transferred to the position "1111"
Related cable slitter as YH-FS45 is also offered,YH-ACS is adjustable from 0.315 in. (8 mm) to 1.125 in. (28.6 mm) cable O.D.,related products fiber patch cord,fiber pigtails,fiber optic fast connectors,adapters,cleaning pens avaialbe.
Remove dirt, water, oil, and other dirt. Apply a little oil to the blade to prevent rust. Placed in a special toolbox
Telecommunications, CATV engineering and maintenance, integrated wiring system, other optical fiber engineering, FTTH fiber to the home.
|YH-8046||For RG 59,RG6 cable F connector|
|YH-8044||For RG 59,RG6 cable F/BNC/RCA/keystone module connector|
|YH-8043||Available for Crimping RG58/RG59/RG62/RG6 F connectors, BNC connectors,RCA connectors.|
|YH-8042||for Crimping RG59,RG6 and RG11 F type compression connectors.|
|YH-8041||Available for Crimping RG6 cable,RG59 cable,RG62 cable,RG58 cable,RG 11cable,RG213|
|YH-8032||for Crimping Modular Plug as 10P10C,AMP RJ45,RJ12,RJ11,4P4C and 4P2C plugs and DEC/OFF SET plug 6P6C. .With Ratchet.|
|YH-6417 2 055-01||Krone type insertion tool with sensor for Krone and 110 terminal block.|
|YH-8017||110/Network/Krone punch tool|
|YH-8030||Tyco Punching tool for 10pairs modules|
|YH-8060||Punch Down Tool for Patch Panel Terminal Block|
|YH-8071||Bix type insertion tool,Inserter wire 9A|
|YH-8072||Porta insertion tool Inserter wire 8A,used on jack tests.|
|YH-8076||SID module punching tools .SID-standard insertion tool for connection of wires; insertion Colour: red|
|YH-8027||Huawei type punch down tools DXD1.|
|YH-8031||Ericsson type punch down tools,color white.|
|YH-8074||Ericsson type punch down tools,color green.|
|YH-8073R||Corning type punch down tools,use on corning type 5000 block,C39407-A139-A12.|
|YH-8073B||Siemens type punch down tools,use on siemens type 71 block,C39407-A139-A09.|
|YH-8029||Punch down tool on 10pair krone module and pouyet module.|
|YH-8021||Simple crimping tool for 3M connectors UY,UR,UG|
|YH-8028||Crimping tool for 3M connectors UY,UB,UR, UG,UIB,UIY,UAL, UBCO,UYCO,UIR, UDW,UDM,Super mini,cross.|
|YH-8026||RJ45 8P8C terminal crimping tool|
|YH-8075||multi-function modular jack termination tool|
|YH-8077||Insertion tool for Quante ID3000 MDF|
|YH-8078||Sunsea XD-B1 insertion tool|
|YH-8079||ZTE MDF compact punch down tool,FA6-09A1 FA6-09A2|
|YH-8080||ZTE MDF compact punch down tool FA6-09B1|
Contact Person: Miss. Xiang