Payment & Shipping Terms:
Nortel FT highband Terminal Block 25 Pair Cat.5E transmission speed TIA/EIA 568
1, Material: PBT or ABS(UL94V-0)
2, Contact: Phosphor Bronze
3, Silver Plating: 0.5 um1.25 um5 um
4, Can be installed on stainless steel back mount frames
5, High band module for back mount and profile mount type
6, for mounting on MDF,racks,profile bracket,indoor and outdoor distribution box,cross connection cabinets.
1. With Clamp modules used ,Complete reed construction, modularized design ;
2. Blocks: 4-pair and 5-pair terminal blocks
3. Cable fit: For wire 0.40-0.80 mm on cable side and 0.40-0.65 mm on jumper side
4. Intermediate resistance: no more than 2.5 M ohm in normal atmosphere pressure (not including bulk resistor)
5. Insulated resistance: no less than 1,000 M ohm in normal atmosphere pressure
6. The intensity of anti-currency: DC 1,000 V (AC,700V) No puncture and flash-over phenomenon in one minute. Accord with industry standard
7. Label: clear label to ensure easy to manage
8. Standard: Cat.5E transmission speed ,Standard: designed by international ISO/IEC11801 and TIA/EIA 568
9. Test device: fluke DSP4300
With back mount frames relatively offered.
Item no. Description
YH-5007-A 25 pair FT connection module,profile type
YH-5007-B 25 pair FT connection module,back mount type
We offer various modules in telecommunication application, the products includes 5pair LSA type connection and disconnection module, 8pair and 10 pair connection disconnection krone module,back mount function and profile function, switching module,10pair Earth connection module, high band modules, 3M type quick connect module, 25pair splicing module, 10pair STG module, Subscriber terminal block, 50pair and 100pair krone block tag, back-mount frames, and other related accessories like LSA patch cord for disconnection and switching modules,earth bar,dust cover,label holder and so on.
The disconnection type CT module have provision of testing the electrical parameters of the exchange and distribution sides by insertion of test plug without actually disconnecting the jumper wire or the cable from the termination module.
The module housing material we mainly offer with imported GE PBT and ABS(UL94V-0).Both material we will use new rall material but not recycling material(first recycling or second recycling).So we can offer good performance modules.You can get very cheap products in the market but they are mainly made of such recycling material PBT or ABS.
High speed LAN and WAN systems,used to connect the Telecom and Data wires with punch down tools.
|Mechanical Performance||Insertion force : 40~75N|
|Pull Out Force : F≥25N(axial) F≥7.5N(radial)|
|IDC Life : 200 times(20-26 AWG Solid wire) minimum|
|Copper Conductor Diameter: Φ0.4~Φ0.8(mm)|
|Environment Characteristic||Storage Tempreture: 40 to 70°C|
|Operating Temperature : 10 to 60°C|
|Relative Humidity: 95%, noncondition|
|Electrical Performance||Insulation resistance: 1000 Mohms minimum|
|Contact resistance :7 mohms maximum|
|Dielectric intensity: AC 1000 Vrms 50Hz or 60Hz in 60s|
Contact Person: Miss. Xiang